|
GeoROG - in production since 1995 |
SBG introduces the new GeoROG V8, with the all new UMC 3D Software
(Universal Machine Control 3D)
The universal solution for 3D machine control which gives you:
- Improved return on investment (ROI)
- Higher precision
- The freedom to use different brands of GPS/Total stations
- One MMI (interface) for all your machines
We have once again designed and perfected the solution for 3D machine
control. Use GeoROG V8 with UMC 3D to control your machines and
earth-moving equipment.
GeoROG
GeoROG—for flexible machine control
GeoROG helps you control a wide range of machines, and you can move it from one machine to another. For example, you can use it for:
GeoROG plane view Excavator
GeoROG is designed to connect to various cross-fall and control solutions, such as:
- Mikrofyn
- Topcon
- Spectra Precision
- Axiomatic BPS
- Trimble
- Gomaco
- Wirtgen
- Lko
- Prolec
- Novatron
- Plasser & Theurer
- Createc
Precision excavation without pegs. Topcon GPS and Mikrofyn in combination with GeoROG.
Total station or global positioning system (GPS)
Most operators position machine via total stations or via satellites, using GPS receivers.
In combination with GeoROG, you can operate various brands of position indicators.
Total station:
- Leica
- Spectra Precision
- Topcon
- Trimble
GPS:
- Topcon
- Leica
- Trimble
- Javad
- Ashtech
- Spectra Precision
- Sokkia
Excavator with a Mikrofyn and dual Trimble GPS solution in Schwinouche, Poland.
Input data
GeoROG works well with various models, for example:
- Road lines. Horizontal and vertical alignment with cross-slope.
- Complex road design including templates.
- Digital terrain models (DTM).
- Points.
- Base lines.
- Heights.
A grader with an Ashtech GPS-Mikrofyn solution in Portugal.
Input data is transmitted directly from an office computer, from a portable computer on the machine, or from a GSM solution to GeoROG. You can also enter data manually by using the GeoROG keyboard.
GeoROG is compatible with various formats via surveying and design applications for PCs, for example:
- DXF
- DWG
- ASCII
- Land-XML
- AnPakke
- Excel
Dredging with a Topcon dual GPS solution in Papenburg, Germany.
One unit in the operator’s cab
GeoROG is housed in one unit, including an 8.4” high-resolution color display. An optional keyboard, light bar, and alarm are also available.
High precision
GeoROG continuously determines exact positions of machines’ mechanical equipment by:
- Reading distances and angles in relation to the total station, or
- Reading coordinates received from GPS receivers.
Trimmer with a Leica 1102 TCA solution, used for the Western Sydney Orbital motorway in Australia.
Position continuously displayed
The display shows updated information about the section (chainage), side offset, cross-fall and vertical deviations. Operators can instantly and easily get information on current data, such as angles, distances, and coordinates.
3D control
You avoid problems such as vertical curves, cross-slope transitions, and changes in width—thanks to GeoROG’s 3D machine control. GeoROG always adjusts the machine’s position or its moving tools, under all conditions—regardless of surface appearance or characteristics.
GeoROG displays an overview of a grader.
Stable, reliable operation
Since 1996, many large and small enterprises inside and outside Sweden have been successfully using GeoROG, which has been proven to be reliable under rough working conditions.
Safer working environment
You increase work site safety because no one is needed outside the machine to check the position. GeoROG reduces idle time and unnecessary equipment transport. Fatigue and risk of injuries are also reduced.
CMI concrete paver with 4 x Leica 1100 TCA solution for the Western Sydney Orbital motorway in Australia.
Improved ROI
GeoROG considerably cuts machine and labor costs. No job is too small for GeoROG, which enables:
- Increased production output.
- Higher precision.
- A reduction in use of construction material.
- Decreased staffing needs.
Road surveyor with GDM 600 ATS solution in Uddevalla, Sweden.
Features and functions
- Graphical views
- 3D View
- Automatic data logging
- GPS skyplot
- Volume calculations
- Background drawings
Easy to use
One-touch operation for the RUN function. Very easy to learn. No previous computer experience necessary.
Paver with a Mikrofyn and dual Leica 1100TCA solution in Posnan, Poland.
Installation and training
SBG AB helps you with GeoROG installation and on-site training of operators and surveying staff. We also offer separate training courses for GeoROG and its related applications.
Guarantee
GeoROG comes with a one-year guarantee on component parts. You can extend the guarantee through a service contract.
Bulldozer with a Leica MC 1000 GPS and Topcon’s System 4 solution in Kalmar, Sweden.
Technical Data
Processor : 1GHz Intel® Celeron®
RAM: 256 MB SDRAM
Operating System: Linux
Display: 8.4" SVGA colour LCD (800*600 pixels)
Storage: Compact Flash 256 MB
Power Supply: 10-36V DC
Physical dimensions: Width 235mm, Height 180mm depth 66mm
Sealing: Water & Dust Tolerant, IP-54
Warranty: 1-Year standard, Service agreement available (including software upgrades)
The GeoROG logo is a registered trademark of Svensk ByggnadsGeodesi AB in Sweden.
All trademarks mentioned on this web site are the property of their respective owners in their respective countries.
© Svensk ByggnadsGeodesi AB.
|
