Version

Date        

Affected function

Description

2010.02.708

10-09-30

Test Version, unverified functions may be included.

LandXML

Support for pipe structures in the form of Pipe Network which is imported in two separate coordinate files (geo), one with the pipes and one with the structs. Attributes such as dimensions, material and pipe types are also stored in the file. Usually will also elevations be present in the file with the structs.

User interface

Dropdown menues are expanded quicker, i.e. the time that the mouse button must be held down has been shortened.

Communication, ActiveSync/Mobile Device Center

Improved handling of the destination folder of the connected unit.

Leica DBX export

Improved export of ROAD-projects to Leica DBX, more clear choices in the dialog.
Problem solved when transferring lines without camber was resolved.

Trimble Link

Incorrect calculation of cross section based on camber (skv) was resolved.

2010.02.704

10-08-27

Test Version, unverified functions may be included.

Cross section graphics

Improved the editing of properties for cross sections in section files, volume calculations and tunnel calculations. The list with the layers is easier to view.

Trimble DC

Support for dc-files with multiple coordinate systems.

MultiHL Tool

MultiHL Tool (used for configuration of network dongles) can be used in 64 bit operating systems.

LandXML

The objekttype ProfSurf can be imported to profiles (prf).

2010.02.703

10-07-13

Test Version, unverified functions may be included.

LandXML

Improved LandXML export:
- Multiple files can be selected and exported to a single xml file.
- Separate transfer of stringlines makes it easier to control the transfer. The center line selection is made in a dialog

Leica DBX

Improved export to Leica DBX
- Multiple files can be selected and exported to dbx.
- A new export dialog.

2010.02.701

10-06-14

Test Version, unverified functions may be included.

Edit coordinate files

Line code can be edited in the point information dialog.

Volyme calculation

Standard sections, fixed problem with the element type ”To terrace”.

2010.02.700

10-06-03

Test Version, unverified functions may be included.

Units

It's possible to select the length unit to be used in a project, i.e. meter or foot (International/US Survey Foot).

Setup

A number of options can be done separately for each project:
- Units
- Code list, symbol file and linetype file
- Number of decimals
- Coordinate axis and angle system

For all options it's possible to select a default value.

Number of decimals

It's possible to select the precision for values shown. These are the values that can be set:
- coordinates
- heights
- lengths
- angles
- slopes
- areas
- volumes
- sections/chainages
- lat/long

Background image

New function to save the image with adjustments for GeoPad.

AutoCAD-support

Support for dwg- and dxf version 2010 and 2011. Both import and export.

New functions associated to the document tabs

Right-click a tab in order to:
- Save the file
- Close the window and all files within it,
- Open the folder containgen the file in the Windows Explorer. This can now also be done in the project tree.

Click the mid button to close a window.

Transformation

A new function with a simplified version of the global transformation. Transforms one or more files between two systems defined by lok-files. The old function is now called "Global transformation, avanced".

Stringline model, LMD

Profile height and point numbers are now set in cross sections created from LMD.

Project

Problem with write-protected project files solved.

2010.01.682

10-06-14

Official version

Multi/Single Network

Problem with connection to the license server solved.

2010.01.681

10-05-17

Official version

Communication, Trimble

Import of coordinate systems TrimbleDC; problem solved for files that contain a scale factor in the local project options, "Local site settings".

2010.01.680

10-04-23

Official version

Surveying

Improved traceability for free stations between GeoPad och Geo.

Communication, Trimble

Fix for lines with clothoids for transfers using Trimble Link.

2010.01.677

10-02-16

Test Version, unverified functions may be included.

Leveling, Sokkia

New function for importing leveling from Sokkia (cs1-format).

2010.01.676

10-02-09

Test Version, unverified functions may be included.

Tunnel

New function for mirroring a theoretic tunnel section (tun).

2010.01.675

10-01-25

Test Version, unverified functions may be included.

Allmänt

Stabilitetsförbättringar samt felrättningar.

Kodlistor

Kodlista för järnväg tillagd.

Koordinatsystem

Norska UTM-zoner.

Languages

Updates for norwegian, finnish, polish and french.

2010.01.673

09-11-11

Test Version, unverified functions may be included.

Grafiska verktyg

Verktygen Trim och Extend fungerar nu även mot en tänkt förlängning av objekten (edge-mode).

Import/Export

Förbättrad import av KOF-format. Stöd för lat/long samt import av linjer skapade med Sagmetoden och Bølgemetoden.

Allmänt

Diverse rättningar (gäller endast version 2010):
- Utskrift av ritning med flera blad.
- Radera objekt i 3D-vyn.
- Import av rådata, resultatfilen öppnades i ett gömt fönster.
- Längdrapport skapad från koordinatfil skapades i ett gömt fönster.
- Problem att spara hjälplagret åtgärdat. .

2010.01.670

09-10-06

Test Version, unverified functions may be included.

User interface

New improved user interface (GUI) with an option to select a theme.
- Tabs instead of separate windows for the files. The tab color indicates the content.
- The project tree and output window can be automatically hidden in order to maximize the desktop work area.
- A new system for snapping windows and toolbars
- New toolbars with dropdon buttons. Click and hold to expose the buttons.

Installation

The installation of Geo has been adapted for Windows Vista and Windows 7 with a new folder structure for projects, global files and system files.

Graphical tools

New tools for Trim and Extend (Trimma/Förläng) . Used when editing coordinate files.

AutoCAD-files

- Stöd för att visa objekttypen 3D-solid.
- Support for dimension objects and solids

Drwaings

Support for dimension objects

Import/export

Improved dialog for import and export.

2008.03.651

09-12-11

Official version

License handling, Single/Multi Network

If the contact to the license server is broken, and can't be establish again, backup-files will be created when Geo is closed down.

Import

Added new version of external format converters.

2008.03.650

09-11-02

Official version

Coordinate systems

Added Lambert 1-parallel projections. (Morocco, Jamaica..).

Communication, Leica

Additional fixes for interpretation of the prism constant when reading rounds of measurement.

2008.03.648

09-09-15

Official version

Profile check

Profile check, improved presentation of deviations and tolerances.

Tunnel

Graphical presentation of the distance between theoretic and measured tunnel can be made in cross sections created without using a tunnel model.

Communication, Leica

Fixed a problem to interpret the prism constant when reading rounds of measurement.

Transformation, graphically

Fixed a problem when saving the transformed data in a new file.

Graphics, 3D

The current setup for zoom and rotation is reset when a new file is opened.

Imort/Export, LandXML

Improvements were made to the LandXML import, e.g. when interpolating string lines from cross sections.

2008.03.646

09-07-12

Test Version, unverified functions may be included.

Grid models

Fixed problem with grid model to coordinate file conversion.

2008.03.645

09-07-08

Test Version, unverified functions may be included.

Alignments

Changes in clothoid calculations.
Traditionally SBG have used an approximation for calculating coordinates on a Clothoid. The approximation has been known to have a limited range of validity. However, the approximation has been well established in road/rail construction engineering so until now there have been little reason for changing it. Recently, it have been demonstrated that there are applications where the range of validity is exceeded, resulting in incorrect results. Therefore the calculation routines have been changed. The change only affects clothoids with a curvature that are close to (or longer) than a quarter of a circle, or such ones that are far away from the segment of infinite radius.
As long as data is imported and used in applications where this change is present there is no problem. But if you send imported or edited data to other applications there might be a problem. Versions of Geo, GeoPad and GeoROG/UMC3D that are not adjusted for this will not calculate coordinates correctly. For this reason, always run a line check in the application where the line will be used, even if you don't intend to modify it.

The line check in Geo has been extended to show an information message if the line consists of clothoids that can cause these kinds of problems in older versions of Geo, GeoPad and GeoROG/UMC3D. .

Coordinate Calculation

Improved correction for earth curvature.

Coordinate systems

Possibility to select the version of the localization file (lok) when saving it, in order to be used in products that can't handle the latest version.

LandXML

Improved LandXML import, solves problem with cross section layers without any data.

Grid models

Fixed problem with grid model creation (642).

Language updates

Updates for finnish, dutch and norwegian.

2008.03.642

09-05-07

Test Version, unverified functions may be included.

GeoPad Communication

When transferring background images to GeoPad it's possible to adjust the file size and image resolution.

Volume Calculation

The report contains separated volumes for each part when using limitating lines (polygons) in the calculation.

LandXML import

Automatic 3D curve interpolation to stringlines can be done directly when importing LandXML files that contains some form of standardized coding (Leica/Trimble/Bentley).

LandXML export

Export of coordinates to LandXML, the order of the line codes was adjusted to work in Mikrofyn's Visual Machine.

LandXML export

Export of coordinate files with lines to LandXML, the file is adjusted to be imported in Leica LGO/TMS Office and Trimble TGO. The element type "Line" is used instead of "IrregularLine" when possible.

2008.02.631

09-03-18

Test Version, unverified functions may be included.

Coordinate systems

New coordinate systems added for the Netherlands.

Export to KOF

Change for line code when exporting to KOF format.

2008.02.630

09-02-16

Test Version, unverified functions may be included.

AutoCAD files

Improved display of dwg files.

Koordinatsystem

Added new Swedish geoid model SWEN08.

Trimble

Trimble Link, fixed problem with the dialog for road export.

Trimble

Trimble DC, fixed problem when reading rounds of measurement.

Trimble

Trimble DC, fixed problem to interpret line codes.

2008.02.629

09-02-04

Test Version, unverified functions may be included.

Licenses

Improved handling of network dongles. A new tool, MultiHLTool, can be found in the start menu of Geo. It makes it easier to shift between network dongle acces (MultiHL) and the other license options.

Coordinate systems

Extended correction of measurements. Now includes correction for geodetic datum, geoid model and local transformation.

Coordinate systems

Added coordinate system files for Denmark and Great Brittain, can be selected in the installation phase.

Lokalization

Fixed errors in the Trimble DC top lokalization import. The DC header was not read properly and the height transformation calculated the sloping plane erroneously.

Graphical Tools

The function that lists the objects within a search area now shows the heights as well, if possible.

Graphical Tools

Error fixes from 2008.02.626, regarding line+profile from dwg, copy from dwg and selection of triangles.

2008.02.626

08-12-19

Test Version, unverified functions may be included.

LandXML

Reads LandXML version 1.1.

LandXML

Import of files containg circle arc > 180 degress fixed.

Graphical Tools

The tools for parallell lines have been extended with the option to handle slope or height difference to the new line.

Graphical Tools

New functions in the graphics, it's possible to select objects from a list if there are multiple ones within the search area.

3D graphics, tunnel

The 3D view can be rotated to show the underside of the model.

Background pictures

Improved handling of large files.

Background pictures

ESRI world files can be used for orientation.

Project Tree

It's possible to control when file folders are expanded.

Lokalization

A text report for the coordinate system can be created.

Communication, Leica

Export of measurement data (plm) to GSI format. It's possible to adjust the file format to a another system.

Communication, Trimble DC

Import of coordinate systems from Trimble DC, will be saved as .lok.

Terrain Models , AutoCAD

Import of terrain models in dwg format (3D-faces) was improved for handling input data where the model points are very close.

Volume Calculation

The dialog for volume calculation (mbs) keeps selected fields between the calculation runs.

2008.01.619

09-01-22

Official version

Licenses

Improved handling of network dongles. A new tool, MultiHLTool, can be found in the start menu of Geo. It makes it easier to shift between network dongle acces (MultiHL) and the other license options.

2008.01.618

08-12-18

Official version

Licenses

Improved connection to the license server and the backup (for Single/Multi Network).

Windows Vista

A problem with file name selection in the Save dialog was solved.

Languages

Updates in the languge files.

2008.01.617

08-10-21

Test Version, unverified functions may be included.

Stringline models

Improved cross section calculation.

Import NYL

NYL import adjusted to handle lines with only one segment.

Rail measurement

The report from the calculation shows cross slope and rail height.

Rail measurement

Support added for the .ver format when exporting to ALC.

2008.01.616

08-09-15

Official Version

Installation

Installation of drivers for hardware locks were separated from the Geo installation.

External formats

The installation of external format converters was separated in the installation process.

GradeStar

The export to GradeStar (Carlson) now creates a project file and also suggests better output file names.

Gyrotheodolite measurements

Implemented support for handling of gyrotheodolite-measured data.

LandXML export

LandXML-export of lines with profile and camber was specialized for use in Visual Machine (Mikrofyn).

Coordinate lines

Insertion of line points with a fixed distance was fixed.

Dwg export

The height of point marks are no longer used when exporting as 2D.

2008.01.613

08-07-03

Test Version, unverified functions may be included.

Length reports

The length report was adjusted to show line codes.

Communication

Import of data from Leica RX (DBX) via Active Sync and USB fixed.

2008.01.612

08-05-16

Test Version, unverified functions may be included.

File conversion

A new function was added for conversion between internal formats; geo to pxy and pxy to geo.

Dwg-export of cross sections (sec)

The chainage is no longer used as the height reference for the lines exported from sec to dwg.

2008.01.611

08-04-09

Test Version, unverified functions may be included.

Coordinate Calculation

The suggested name of the report conflicted with the name of the measuremnt file, with the risc of overwriting it. This is now fixed.

The Project Tree

Improved updating.

The Project Tree (shortcuts)

It's possible to add a complete folder with files (not recursive).

Import/Export SOSI

Various improvements in the file conversion.

Coordinate files/graphics

If the line code is set it will be used for control of the line type to use in the graphics. Otherwise the code of the first point in the line will be used. Also applies for AutoCAD export.

Import/export

The instrument related formats were moved to the top of the menu.

Licensing

User name and company can now be set even when using certificates.

2008.01.609

08-02-29

Test Version, unverified functions may be included.

Communication GeoROG

Problem with file transfer from other directories than the project root fixed (only a problem in version 2008).

Drawings

Improved display of symbols in coordinate lists in drawings.

2008.01.607

08-02-21

Test Version, unverified functions may be included.

Licenses

A new technique for licenses based on certificates (replaces license codes).

Projects

A new project view consisting of three tabs:
1. Dynamic project tree. Automatically displays all files in the current project directory and its sub-directories. Geo monitors changes in these directories which makes it easy to see whether files are being added or removed. The files are ordered by file type which makes it easier to open them without having to use the "Open file" dialog. Double-clicking a file opens it, while right-clicking allows you to perform other operations such as creating new files, renaming them, send by e-mail, archive, etc.
2. Project Shortcuts. Allows you to manually add shortcuts to files you want to access easily, even files not part of the current project you're viewing. This can be useful if you have a set of files you use for multiple projects.
3. Project Settings. A single view where you can manage all project-specific settings. It makes it easier to get a quick overview and make changes to the current project's settings.

Installation

New installer, using msi files.

Installation/Language

It's now possible to switch what language Geo uses without having to install a different version or having to reinstall the application. Language settings can be changed in the Help menu.

Coordinate systems

Files for coordinate systems are now part of the Geo installation.

Coordinate systems

A simplified wizard for localization. We use a new format called .lok, which is also used by GeoPad..

Measurement

A new format for levelling has been introduced. The .lvt files work like .lev files but with greater precision.

Roadlines

The function "Sections along line" contains a number new calculation alternatives on page 2. Still developed.

Roadlines

Line files (lin) can be converted to coordinate lines (geo) directly in the graphics.

Graphics

New dialog for files in graphical windows. It's now column-based, so it's easier to view files with long search paths. You can also turn off point numbers, height and codes for many files simultaneously.

Graphics, AutoCAD

You can select which AutoCAD version you want to use by default when you save .dwg or .dxf files.

Graphics, AutoCAD

Import of xr-filer (file with external references to AutoCAD). Activated when a dwg is open and there is an .xr file in the same directory.

Graphics, AutoCAD

Frozen layers in dwg files were visible in 3D-views. Fixed.

Export Bever

The file type for Bever export changed to .tli.

Import LandXML

Fixed error when importing LandXML file with station equations.

2007.10.580

08-01-25

Official Version

Import LandXML

Fixed error when importing LandXML file with station equations.

2007.10.579

07-10-15

Test Version, unverified functions may be included.

Volume Calculation

Changed handling of rock unit height in mbs. It's controlled by a new check box in the mbs rock properties.

Volume Calculation

A new check box for extrapolation of rock in mbs.

Volume Calculation

Improved error checking when calculation cut and fill.

2007.09.577

07-09-13

Test Version, unverified functions may be included.

Drawings

Solved a problem with multiple drawings referring to the same dwg file.

Net adjustment

Free net adjustments with bearings fixed.

2007.08.576

07-08-13

Test Version, unverified functions may be included.

Export to AutoCAD dwg/dxf

No extra POINT-object will be created for points that also generates a block insert. Messages shown during export more informative.

Measure

Possibility to set a scale factor (ppm) when calculating a free station.

2007.06.572

07-06-18

Test Version, unverified functions may be included.

Communication

Transfer of road line to Geodimeter/Trimble 600 didn't work in version 568-570

2007.06.570

07-06-07

Test Version, unverified functions may be included.

Communication

File transfer from GeoPad didn't work in version 568. Fixed.

Import REB

Extended support for import of REB-data.

2007.05.568

07-05-30

Test Version, unverified functions may be included.

Graphics

New graphical tool for transforming objects. Select the objects to transform and point out the alignment points. Both coordinate files and AutoCAD-files can be transformed.

Graphics

New graphical tools for zooming. It's possible to store 2 different zoom-positions and easily switch between them with toolbar buttons. Can be very useful for the new graphical transformation tool, when alignment points in two different systems are to be connected.

Graphics

New zoom-option. Zoom to selected objects.

Graphics

More options when inserting points in lines. It's possible to control distances and intersections with other lines.

Graphics

The snap for perpendicular can use the intersection height.

AutoCAD-support

Support for AutoCAD version 2007 and 2008. Both reading and writing.

AutoCAD-support

When extracting data from AutoCAD files, objects with insert point 0,0 can be filtered.

Remove duplicate points

Extra options for how to remove duplicates.

Compare files

Added the text "Result: File 1 - File 2" to the file compare report.

Tunnel

Tunnel contours can bew created directly from cross sections.

Communication

When transferring to Trimble TSCE, a warning is given if duplicate point numbers exist.

Import SOSI

Line codes are handled bewteen SOSI- and GEO-formats.

2007.04.557d

07-04-12

Official Version

Export LandXML/Leica 1200

Now it is possible to export mbs to LandXML or Leica 1200. Contact support for details.

Import KOF and SOSI

Improved conversion of point- and line codes.

Line files

Simple clothoid to cubic parabola conversion. Will convert all clothoid transitions that are "tangent to curve" or "curve to tangent".

2007.03.557

07-03-16

Test Version, unverified functions may be included.

Import KOF

Line codes are set when importing KOF-files. It's also possible to set the line codes according to Anpakke standard (-2.2, -1.2, 1.2, 2.2 ...).

Import Trimble DC

Fix for import of geoid model.

Graphics

Saved graphics views (.ggv) couldn't be opened in version 555. Fixed

2007.03.555

07-03-09

Test Version, unverified functions may be included.

String model

A new stringline-based model format.

Terrain models

A new graphical tool, create section. Point out a line in order to calculate and display long sections and/or cross sections.

Coordinate files

A new numerical view makes it possible to view and edit the line properties in a coordinate file.

Graphical tools

Extended output from the baseline tool.

System

New hardlock drivers with support for Windows Vista

2006.12.532

06-12-11

Official Version

General

General adjustments for Windows Vista.

Graphical views

New function: Save Graphical views. The function makes it possible to save the current graphical view along with all the files and their settings (e.g. colors, point features and zoom level). This is very useful if you wish to reopen a set of files with their individual settings later on. The view file can then be added to the project tree for even easier accessability.

Rail Surveying

The function has been changed to be able to save the data in ALC format (for further use in rail bound machines). It's also possible to exclude the slope correction if this already has been done in the GeoPad.

CE-Communication

New template-based transfer to any CE-unit. Makes it possible to select startup directory and default data format for the unit.

Communication Leica

Added support for geoid model and deformation model on DBX-import.

Communication Trimble SCS900

Added import of control file (equivalent to pp-file).

Import LandXML

Import of string model from LandXML. It's possible to select the layers to import.

Export to AutoCAD

The color of layers is set according to the code list for coordinate files drawn using it.

Tunnel

Visualization of the tunnel only used the first tunnel model. Fixed.

Import TrimbleDC

Instrument accuracy was read wrong from DC file. resolved.

Coordinate systems

No longer possible to select other than GRS80/WGS84 as global ellipsoid.

Settings

No longer possible to select other unit than degrees for Lat/Long.

Net adjustment

Hna-document couldn't be opened if the input order for X and Y had been switched. Fixed.

2006.10.519

06-10-10

Official Version

Communication

An error when trying to read from some instruments fixed. Only applies to version 2006.06.504 / 510 / 515.

Communication

Sokkia SD2/3, fixed error reading angles in gon.

Export till AutoCAD

Lager för punktkoder kunde skapas även om man valde filnamn eller fast lager vid exporten. Fixat

Export till AutoCAD

Om en koordinatfil ritas med symboler enligt kodlista sätts lagrens färger enligt denna om man väljer punktkod som lageröverföring.

2006.09.515

06-09-14

Test Version, unverified functions may be included.

Surveying

The use of height correction (earth radius and refraction) in coordinate calculations is now done for each station, separated in the station headers in the plm-file, instead of the previous project setting. Note that if an older plm-file (where this information isn't present) is opened height correction will be turned on, even if the old project settings were off.

Graphical editing

When a points is moved in the graphical window and the target point is snapped upon, it's now possible to select the height of the point.

Graphical editing/AutoCAD

Improved snapping in dwg files. Quicker selection when in multi snap mode.

Graphical editing/AutoCAD

A new snap tool uses the insertion point of blocks and text objects.

Drawings

Improved support for relative paths for files in drawings (dra).

Tunnel

The resulting file from the function "Adjust points to tunnel section" couldn't be viewed in 3D.

Line Data (lin)

New function to insert cubic parabola in the form of circle arcs.

Reports

Automatic name suggestion for created reports.

Import AnPakke

Put labels on normal section elements when importing tvv-files.

Export KOF

Writing KOF-files was corrected.

LandXML/Leica 1200

Support for exporting linemodel in the form of coordinate file.

LandXML/Leica 1200

Made the LandXML export dialog more descriptive + remember left/right codes from last time.

LandXML/Leica 1200

Better lin+prf+skv export, now manages all changes in lin+prf+skv.

Communication Trimble

Line file export was adjusted for Survey Controller 11.31 (Trimble DC Transfer).

Communication Trimble

Code lists and .dxf can be exported directly to Survey Controller via Trimble Link.

Communication

File transfer to USB was corrected.

Coordinate systems

Ellipsoid "Australian National" added.

2006.08.510b

06-08-17

Official Version

Communication

An error when trying to read from some instruments fixed. Only applies to version 2006.06.504 and 510.

Communication

Sokkia SD2/3, fixed error reading angles in gon.

2006.08.510

06-08-17

Official Version

Communication

Selection of com-ports fixed. Only applies to version 2006.06.504.

2006.06.504

06-06-21

Test Version, unverified functions may be included.

Levelling Net

Graphical representation of levelling nets.

Levelling Net

Possibility to create control loops for data to adjust.

Communication

Transfer of files to USB device for further use in the GeoROG.

AutoCAD files

Dwg files can be transformed.

AutoCAD files

External references can be removed from a dwg file.

AutoCAD files

External references can be bined to a dwg file.

Coordinates

New cinditions for point filters; between, outside and modulus.

Graphics

Point numbers can be set with the function "Set point informaation".

Drawings

Alignment lines between drawing sheets can be shown.

2006.04.497

06-04-20

Official Version

AutoCAD files

New graphical tool for exploding objects and blocks.

AutoCAD files

Printouts of dwg- and dra-files in the same view could be misplaced on some printers.

Graphics, Help Layer

The help layer is automatically activated as soon as a help layer tool is selected.

Graphucs, Terrain Models

Triangles can be filled using a pattern and color.

3D Graphics

When changing from 2D graphics to 3D, the same colors are used for the files.

2006.03.494

06-03-23

Test Version, unverified functions may be included.

AutoCAD-files

Lineweights can be changed in dwg-files.

AutoCAD-files

Linetypes for layers can changed in dwg-files.

AutoCAD-files

Plotting fixed for dwg-files in combination with background images.

Communication, Trimble

It's possible to generate lines based on codes for measurement files.

Communication, Geodimeter

Improved precision when exporting to older Geodimeter-units.

Import/Export, SOSI

File export now allows setting variables in .HODE.

2006.03.492

06-03-10

Official Version

AutoCAD files

AutoCAD files placed in drawings of .dra format are shown in page views.

AutoCAD files

Point texts in coordinate files can be written either as attributes to blocks or as text objects.

AutoCAD files

Damaged or corrupt dwg files can be repaired.

Import/export

Support for SOSI format.

Import, Leica GSI

Chainage was calculated wrongly during import of HZALIGNM and VALIGNM..

Terrain models

Better handling of corrupt models when creating terrain sections.

2006.02.488

06-02-21

Test Version, unverified functions may be included.

Setting out

The report from the set out calculation adjusted for sloping distance and height difference.

AutoCAD files

When extracting coordinates the point code is set to the AutoCAD layer.

2006.02.487

06-02-10

Test Version, unverified functions may be included.

Line profiles (For pipes, wires, gas ...)

New file format for line profiles and related information about types, dimensions, chambers...

AutoCAD-files

Support for dwg- and dxf-files created in AutoCAD 2004, 2005 och 2006.

Support for binary dxf-files.

All AutoCAD-objects in dwg- and dxf-files can be viewed, e.g. dimensions, text styles, splines and others.

AutoCAD line stiles based on .shx-files can be shown.

Support for AutoCAD text styles based on .shx-files.

Support for AutoCAD-drawings with TrueType-fonts (ttf).

Support for external references (XRef).

Suppport for creation of external references (XRef).

Extraction of nested blocks data to coordinate files.

Extraction of selected object in the graphics as an alternative to layer-based selections.

Support for Layouts in dwg-files.

Support for Auditing dwg-files.

Support for Purge-command in dwg-files.

Dwg-files can be vektorisered to coordinate format.

Objects in dwg-files can be removed.

Improved editing of layer options.

Improved export till dwg-format. Separate setup dialogs for each file type.

Drawings

When exporting drawings to dwg each page will be represented by an AutoCAD Layout.

Drawings

Profile drawings with line profiles (pipes, wires...) can be created.

3D-Graphics

Circles and radii in coordinate files can be viewed in 3D.

Import/Export of KOF-format

KOF - updated for version 2.

Import/Export LandXML

LandXML - A line-based model can be created as an alternative to a mbs-file.

Leica-DBX

DBX-databases are time-stamped.

Leica-communication

When exporting road lines with profile and camber all gsi-files are written with the same decimal setup to make sure that the instrument uses the correct configuration.

Trimble-communication

Fixed a problem with new-line-start when generating lines by point code.

2006.01.479

06-01-24

Test Version, unverified functions may be included.

2006.01.478

06-01-20

Test Version, unverified functions may be included.

LandXML

Improved import of mass description. New options controlling output directory and limit to section interval.

Files

No more limits on how many files can be selected/opened at the same time.

Files

Faster file load when opening many lines.

Tunnel

Fixed problem when opening tbs-files. Only an issue for version 2005.12.473.

2005.12.473

05-12-13

Test Version, unverified functions may be included.

Communication via Trimble Link

Support for Trimble Link, for transfer between Geo and Trimble's instruments and units.

Communication Leica

Improved error handling when using Leica Roadrunner and Printf-pc.

AnPakke import

Improved reading of tvv files with many columns.

Volume Calculation

Fixed a problem when calculation deep excavation in some sections.

Volume Calculation

Reduced distance between the model layers when priority is used.

Tunnel

A problem with tun-files having points on the same elevation as the profile was fixed.

Models

Model to model calculation. The grid method used border incorrectly. Fixed.

Models

Modified Cut Model dialog slightly.

2005.11.470

05-11-16

Official Version

Volume Calculation

In cross sections where the excavation layer follows a model layer without cutting it, a false length can be reported for the layer. Fixed.

Export to AutoCAD

When exporting contour lines to AutoCAD dwg the elevation of the lines will now be used even for rounded curves.

2005.11.469

05-11-08

Test Version, unverified functions may be included.

Communication GeoROG

Limit for long file names increased when transfering to the GeoROG.

CommuniCation Leica

The options for transfer as either DBX or GSI wasn't stored. Fixed.

Communication Trimble

Several changes, e.g. regarding cdoes for line start and line end.

Numerical Views

When saving a numerical view in Excel-format (xls) the sheet name is set in order to avoid a warning in Excel.

Import LandXML

Changed name setting of files.

Tunnel Calculation

Fixed a problem when using a calculation different interval than the one in the tbs-fil.

2005.10.467

05-10-19

Test Version, unverified functions may be included.

Communication GeoROG

Several improvements, e.g. a warning is given if a file already exists when transferring to the GeoROG.

Line calculations

Correction of points to sections/profiles. Point codes are transferred from input data.

Communication with Leica System 1200

Improved functionality when importing data from Leica System 1200.

Communication with Trimble

Simplified transfer to Trimble Survey Controller with Trimble Link. Contact SBG if you would like to test the function.

2005.09.464

05-09-12

Official Version

Coordinate systems

Several stereographic projections included.

Free station

Problem with measurements in face 2 resolved.

Graphics, area tool

Current area shown in output pane, no need to create report.

Communication, TrimbleDC

Line coding supported when transferring point data.

Communication, Geodimeter 600

Problem with large coordinate files resolved. Problem with long job names resolved.

Communication, GIF10

Problem to transfer coordinates to GIF10 resolved.

Hardlock

Support for Aladdin HASP HL hardlock.

Presentation

The sign for km-limits in chainage values can be changed.

Point Database

Search for points, an error when combining the SELECT-statement fixed.

Point Database

A table view can be used without an indexed column.

Volume Calculation

Element with direction to line+profile can now be vertical.

2005.06.456

05-06-21

Test Version, unverified functions may be included.

Levelling, from gsi

"Measure Only" will be interpreted as an intermediate point.

Import/Export

File folders with names containing a point were not shown correctly.

Communication GeoROG

It wasn't possible to step back from an empty directy. Fixed

Coordinate calculation

Special code PP now asks where to save coded points.

Numeric view

New option in numeric view to locate points and lines in the graphical view

Terrain models (volume calc. model to model)

Grid method made safer. Now also possible to create output file from the calculation.

Volume calculation

Fixed error in calculation of extra excavation.

Tunnel

Visualizing. The complete rock model was always used despite of the calculation interval. Now only the part inside the interval is used.

2005.05.454

05-05-31

Official Version

Graphics

Object selections can be transferred between 2d- and 3d-views.

Coordinate files

Lines without points can be removed and single point lines can be converted to single points.

Volume calculation

Fixed error in calculation of extra excavation.

2005.05.453

05-05-26

Test Version, unverified functions may be included.

Terrain models

Connection of triangles between separated model parts can now be made.

Import/Export, LandXML

Now handles station equation.

Export Leica 1200  (LandXML,DB-X)

An error in chainage calculation for side lines was fixed.

Export KOF-format

The file could be formatted incorrectly. Fixed.

Files

Modified files are displayed in the document dialog.

2005.05.449

05-05-11

Official version

Project settings

The illustrations in the documentation for the base line tools ortho in 2d and foot point 2d were incorrect in version 448. Resolved.

2005.05.448

05-05-06

Test Version, unverified functions may be included.

Project settings

When creating a new project, the description is set from the project path.

Graphics

Baseline ortho out 2D now gives height over baseline as well as height over base point. Documentation Updated.

Graphics

Object information. 2D- and 3D-lengths of lines in coordinate files are reported.

Communication, Zeiss

Problem solved when converting raw data from Zeiss level run.

2005.04.447

05-04-11

Test Version, unverified functions may be included.

Terrain models

New function cuts terrain models.

Terrain models

New function merges terrain models.

Graphics, terrain models

It's possible to snap to triangle points.

Coordinate systems and transformations

Changed setup to match those made in GeoPad and GeoROG.

Coordinate systems and transformations

New functions for transformations between local coordinates and gps coordinates.

Coordinate systems and transformations

Support for new projections. USA, Estonia and the Tjech Republic.

Volume Calculation

New features for slope fill calculation, deep excavation and vegetation.

Import/Export, LandXML

Improved calculation of edge lines.

Communication, Leica 1200

Improved calculation of edge lines.

Communication, Geodimeter

Horizontal distances (label 11) accepted in program 32.

2005.02.441

05-02-11

Official version

Point Database

A new module for point databases makes it possible to connect Geo to any ODBC-compatible database.

Layout

The layout was changed to the "Office XP/.NET"-look.

GeoROG-communication

Data can be transferred between Geo and GeoROG by a network (TCP/IP).

Coordinate files

Report of point codes. A new report in Geo shows all existing point codes in a certain coordinate file.

Communication Trimble/Zeiss

When retrievning levelling data from DiNi where the "Intm"-function has been used, backsights could be missing in the lev-file.

2005.01.438

05-01-24

Coordinate files

New function to renumber a file along a road/rail line.

Compare files

Points can be compared using a tolerance.

3D-graphics

Options for terrain models can be saved.

3D-graphics

Options for 3D viewing can be saved.

Graphics

Some tools, e.g. Connect and split lines, could cause failure. Fixed. 

Road lines

Profile offset got wrong if both offsets were on the same side but not equal. Fixed.

Graphics

Parallel lines failed if two following elements had the same direction.

Levelling, from gsi

Start record  was added after each detail point in some files. Applies to build 427-.

Tunnel

A tunnel (tbs) with only theoretic data could produce extra points in the calculated cross sections.

2004.11.429

04-11-17

Communication, Windows CE device

Transfer background image to GeoPadCE. Requires GeoPadCE 2004.11.124 or later.

Communication, Geodimeter CU

Data flow slowed down a bit when transferring road data to avoid issues with USB/serial adapters.

Rounds of measurement

Problems with data measured with only one round. Fixed.

Volume Calculation

Fixed a problem regarding calculation limits in an mbs.

2004.11.427

04-11-12

Import/Export, Trimble/Geodimeter

Instrument heights can be incorrect when reading gdt-files. Applies to Geo version 2004.10.424 och 426. Fixed.

Import/Export, Leica

Level run, a detail measurement could not end a sequence. Fixed.

2004.11.426

04-11-04

Volume Calculation

Different setup can be used on the left and right sides of a standard section (nsd).

Volume Calculation

A new function for renaming a standard section (nsd) was added.

Import/Export, TrimbleDC

In some gps data files, geoid model was not loaded correctly. fixed.

Import/Export, Leica

Export of .lin-, .geo- och .trm-data to Leica DB-X (System 1200). Uses the Leica program RoadRunnerAddOn .

Import/Export, LandXML

Mass descriptions (mbs) och standard sections (nsd) can be created when reading line structures from LandXML

Drawing

Folding-marks weren't shown in the last version of Geo (2004.10.424). Resolved.

Drawing

The function that inserts symbols into a drawing dind't works in last version (2004.10.424). Resolved.

2004.10.424

04-10-24

User interface

The Open Dialog now lists files in detailed mode.

User interface

New shortcut for print preview.

Communication, GeoPad/CE

Quicker viewing of files in the CE-device.

Communication, GeoPad/CE

Geo reads the predefined root directory of the CE-unit.

Communication, GeoROG

Remote connection for transfer of files between Geo and GeoROG.

Communication, GeoROG

Setup files can be transferred to Geo.

Communication, GeoPad/CE, GeoROG

New shortcuts for GeoROG and GeoPad (CE) transfer.

Import/Export, LandXML

Coordinate files, terrain models, line files and profiler can be read and written to/from the LandXML format. Requires that Microsoft .NET Framework 1.1 is installed.

Import/Export, Leica

Conversion of terrain models from the Leica GSI format to Geo .trm format.

Import/Export, Kordab

Import of Kordab-files, .242- and .243-files can be merged to one coordinate file directly when importing.

Import/Export, Kordab

Import av Kordab-files, type codes can be converted to Geo codes with the code list.

Import/Export, AnPakke

Improved import of AnPakke data to mass descriptions, mbs.

Graphics

Support for GIF format in background images. Also TIF format with LZW-compression.

Graphics

Smarter usage of the snap functions when using graphical tools. Some tools don't use the snap, e.g. zoom window and select objects.

Reports

The logotype in reports and lists can be in bitmapped format. Possible formats: bmp, jpg, pcx, tga, tif, gif, png.

Road lines

New function, Modify sections (.sec). Can be used to channge codes or heights in a cross section file.

Road lines

Editing of lines and profiles. The start point of the next element can be calculated if the length and direction is given.

Drawings

It's possible to set the default drawing panel for new drawings.

Drawings

Bitmapped formats can be used for logotypes in drawings. Possible formats: bmp, jpg, pcx, tga, tif, gif, png.

Terrain Models

AutoCAD Dwg/Dxf, surfaces (3d-faces) can be extracted directly to terrain models (.trm).

2004.08.351

04-08-20

Communication, Leica

Line files that were exported to gsi-format and then back to .lin-format again had radiuses 10 times too small.

2004.08.350

04-08-04

Koordinatsystem

The positive direction of the coorinate axis can be changed. This only affects the presentation of coordinates.

2004.06.348

04-07-16

Communication, Geodimeter 600

New UDS-files in the global folder.
1.uds: Station setup for standard measurement. Links to 11.uds
2.uds: Prepares for rounds measurement with prog 32 by setting pressure, temp, PPM, operator etc.
11.uds: Standard measurement. Logging of measurement data.

Communication, Leica

New files for System 1200, in the global folder.
Code lists:
SBGCTRL: Contains SBG´s free codes. (Control codes)
SBG2CTRL: Contains SBG´s free codes, and the code list SBG2.
Export filters:
SBG_GSI_Coo_v1.FMT: Exports points and lines to GSI-format for Geo.
SBG_GSI_Pol_v1.FMT: Exports measurement data to GSI-format for Geo.

The Geo software has been updated to handle these exported files.

Communication, Leica

New handling of Info-records (72-79) in GSI files. User selection of interpretation. Attribute, special code or remark.

2004.06.347

04-06-11

Communication, Leica

Export of terrain models to Leica GSI.

2004.04.345

04-04-23

Communication, TrimbleDC

Gps data could be transformed wrong. (from ver 341). fixed.

2004.04.344

04-04-21

Voume Calculation

Calculation of rock surface could in same cases include the area for rock uncovering.

Voume Calculation

The area for rock uncovering is included in the volume reportalong with the area for rock cut.

Graphics, help points

The Help Point file now has the same name as the project file.

Tunnel

Nya calculation fields available. The surface area for rock under/over the theoretic tunnel can be calculated.

Communication, TrimbleDC

Adjustment of exported profiles for safer input to the ACU.

Communication, TrimbleDC

Deleted points in the dc-file reappeared in geo. fixed.

Communication, TrimbleDC

Gps data. If the dc-file contained multiple coordinate systems, all were used, instead of just last. fixed.

Communication, TrimbleDC

Gps data with 3 parameter fitting where transformed wrong. fixed.

2004.04.342

04-04-06

2004.04.341

04-04-05

Communication, GeoROG

Transfer of geoid model fixed.

Export to AutoCAD dwg

Texts with multiple rows are separated into single objects in AutoCAD.

Cross section drawings

The texts for area and length in the cross section have been replaced to occupy a smaller area and be better aligned in AutoCAD dwg.

2004.03.340

04-03-18

Roadlines and volume descriptions

Intersection with sideline could fail if the intersection was directly on a break point in the sideline.

Surveying

New function. Distance report from measurement file. Calculates all distances between surveyed points.

Volume Calculation

The previous cross section line fix in build 339 caused problems in the volume calculation. Fixed.

Communication, Trimble DC

A line where the vertical information starts ahead og the plane caused problems in the ACU. Fixed

2004.03.339

04-03-12

Volume Calculation

The pages in the volume report are given different names to avoid problems when importing the file to MS Excel.

Cross Sections

It is now possible to handle gaps in the cross section lines. The gaps can be edited both numerically and graphically.

Cross Sections

Adjustment of points to sections. The option to not sort the points by side offset didn't work.

Graphics, Select/Merge polylines

Easier to select single points placed directly over points in a line.

Graphics, Parallel lines

Better handling of closed polygons.

Graphics, Parallel lines

Heights could be wrong. Fixed

Graphics, Draw polyline

Line no as standard in input window.

Communication, Trimble DC

Export of road lines to the Survey Controller. Adjusted end bearing of clothoids in the dc-file.

Communication, Trimble DC

Export of profiles to the Survey Controller. If the line has deviations additional points will be added in the dc-file.

Communication, Geodat 600

Program 32, administrative data (pressure, temp, operator etc) can be placed before the station point.

2004.02.338

04-02-10

Drawings

Fixed a problem with paper views in profile- and cross section drawings. Applies to build 337.

2004.02.337

04-02-06

Drawing

Implemented viewing and printing of drawing with background image.

2004.01.335

04-01-22

Installation

If the hardware lock drivers have been installed it's no longer necessary to have administrator rights to update Geo.

Communication, TrimbleDC

Added support for old version 4 files, used by some Sokkia total stations.

Communication, TrimbleDC

Coordinate systems with a latitude of origin not zero was not handled correctly.

Rounds of measurements

Possibility to deselect reduction to 0 for first object.

2003.12.333

03-12-16

Tunnel

Error when calculating theoretic tunnel area corrected. Applies to build 329-332.

Tunnel

Now it's possible to calculate a tbs with only theoretic input.

Graphic tools

New tool for least squares fitting of arcs and lines.

2003.11.332

03-11-21

Levelling net adjustment

Report for multiple observations on the same objects.

Levelling net adjustment

Clearer entry of a priori standard deviations.

Graphics, copy to active document

Better handling of points/elements.

3d-graphics

Selection of single points in the 3d-view didn't work properly.

Communication, Trimble

Conversion of terrain models to Trimble's TTM-format.

Communication, TrimbleDC

Some files could not be read. fixed.

Communication, TrimbleDC

Error in base station height fixed.

Tunnel

Improved in- and offlogging of the module when used in a network.

2003.11.330

03-11-05

Communication, Windows CE device

File dates are set to same as original when transferring files

Profile documents

Possibility to manually edit connection between elements added.

Profile documents

"Gaps" i pro- and tpd- documents were not correctly drawn in the graphics view. fixed.

3d-Graphics

Precision loss when showing files with high coordinates solved.

Volume Calculation

New standard sections could only be created in the project directory.

Volume Calculation

Problem with creation of terrace fixed (only version 329).

2003.10.329

03-10-30

Archives

New functions to create and open archives in zip-format directly from Geo. Can also be sent as e-mail directly.

Volume Calculation/Tunnel Calculation

New function, Visualization. Creates 3d-views with colored surfaces for different objects.

Volume Calculation

New stop function for elements in standard sections. Stop 'to line and center profile'. The element connects to an edge line for side offset and to the center line for elevation.

Tunnel

Printout of theoretic tunnel from numerical views fixed.

Cross Sections

Adjustment of points to section. Possibility to not sort points sidewise (i.e. to keep measurement order).

Coordinates

New function creates chainage report with sloping distances between points in a coordinate file.

Import/Export

Boreing. Export of line coordinates to Tamrock format.

Surveying

Sequnce Measurement. The conversion takes place after coodinate calculation. Other instruments that Geodimater can now be used.

Graphics, AutoCAD Dwg

When extracting data, the point code will be set according to the layer in the dwg-file.

Lines

The function 'Section along line' didn't set the special code CF for camber correctly.

Lines

New function to recalculate chainage in a line according to the element lengths.

Lines

The line-reverse function added to the menu.

Profiles

Graphical copy from terrain profile to theoretic profile didn't work.

2003.09.325

03-10-10

Coordinates. Orhtogonal transform 3D

Bug fixed.

Volume Calculation

Interpolation of build-up will now be calculated for elements that attach to a side line.

Graphics. Measuretool and baseline.

Line slope is shown in percent.

2003.09.324

03-09-30

Graphics, AutoCAD Dwg

Adjusted text heights for texts in dwg-files.

Graphics

Adjusted text heights in graphics and drawings. I the two latest versions the heights were slightly bigger. Fixed

2003.09.323

03-09-29

Linecoding for Leica instruments

Changes made to linecoding type 1. (line no from code 7, point no same as entered in the instrument).

Volume Calculation, model to modell

Build 322 contained an error in the calculation. Fixed.

Export to AutoCAD Dwg

Improved display of information about the transfer result.

Communication, GeoPadCE/GeoROG

Associated files when transferring tbs- mbs- and lin-files had a bug. fixed.

Communication, TrimbleDC

Support for attributes when reading coordinates and surveys.

2003.09.322

03-09-23

Communication, TrimbleDC

Error in atmospheric correction in DC version 10.7. Fixed.

Import of AutoKa-PC

Improved reading of file headers.

Terrain Models

Problem when creating terrain models based on multiple coordinate files fixed.

Graphics

Update of graphics improved when editing profile element data.

2003.09.320

03-09-17

Volume Calculation/Tunnel

Files that are part of a mbs or tbs can be put in any file directory.

Tunnel

New function, 'Correction of Points into Tunnel Sections' (comp. Tunnel Tacheometry).

Communication, Gdm 600

Delay added after each sent point, to prevent time out in serial communication.

Communication, GeoPadCE/GeoROG

When transferring tbs- mbs- and lin-files, associated files can be included automatically.

Import Anpakke

More options when interpreting camber file.

2003.07.318

03-07-29

Communication, TrimbleDC

Adjustments made for new data types in version 10.7.

Levelling net adjustment

Possible to sum measurements over move points.

Survey, runds of measurement

Did not work when data was stored as height diffs instead of vertical angles.

2003.07.317

03-07-07

Communication, GeoPad/GeoROG

New tool outputs Gps-coordinates on the port. Useful when testing mbs-files in the GeoROG och GeoPad before real usage.

Graphics

The tool for connecting points to lines could loose it's lock or lock on unwanted objects.

2003.06.315

03-06-23

Survey, calculation of coordinates

Bugg in special code R3 fixed.

Survey, correction of measurements

Height reduction and arc correction added to Estonian projection correction.

Graphics, profile

Improved editing for terrain profiles (pro/tpd). Both graphical and numerical. Numerical printout fixed.

Graphics, profile

Terrain profiles can be color-coded using both the side offset or layers. Applies also for symbols and line types.

Graphics, profile

Terrain profiles can be copied graphically to theoretic profiles (prf).

Graphics, profile

Terrain profiles can be created from cross sections (sec), all cross section layers (soil, rock, excavation and others) can be transferred to the profile.

Graphics, cross sections

Punkter i tvärsektionen kan flyttas grafiskt.

AutoCAD Dwg

Extracted data can be transformed directly.

Volume Calculation

Element with the combination 'to terrace' and buildup type 'unknown' fixed.

Volume Calculation

Elements with 'cut at' weren't marked in the graphics.

Communication, TrimbleDC

Transfer of road line data (line, profile, camber, cross sections) to/from Trimble DC.

Communication, Leica

Cross sections (sec) can be exported to the gsi-format.

Extract with polygon

Files containing radiuses could cause failure.

2003.05.313

03-05-26

Survey, free station

Backsights no longer need to be collected at the top of the document.

Graphics

New snap-tools. 'Perpendicular', 'Near' och 'Tangent point'.

Communication, Leica

Camber >= 10% handled in sta- and crs-files when writing gsi-files.

Communication, TrimbleDC

Transfer of GPS-data from Trimble DC. Contact SBG for instructions.

Communication, TrimbleDC

Adjustments to Roadline transfer.

Communication, TrimbleDC

Adjustment for Trimble Survey Controller v7.50 or later.

Cross Sections

Possibility to view the profile elevation and the difference from it for points in a cross section.

Volume Calculation

Calculation of top soil outside polygon fixed..

2003.05.311

03-05-14

Communication, TrimbleDC

Adjustments to Roadline transfer.

Communication, GeoDos

Roadlines did not transfer correctly. (All version 2003).

2003.05.310

03-05-12

Graphics

Curve alignment lines can be drawn for theoretic profiles/vertical lines (prf).

Graphics

Some line types weren't drawn correctly in the graphics.

Cross Sections

In the function 'sections along line', codes for the points to be calculated can be entered.

Cross Sections

The function 'sections along line' is modified so that 'profile offsets' will be included in the calculation.

Cross Section Stake Out

It's now possible to enter a negative point-offset when createing a 'orthogonal point report'.

Communication

Transfer of cross sections to Trimble DC. Contact SBG for instructions.

2003.05.309

03-05-02

Communication

Transfer of line, profile and cross fall data to and from Trimble DC. Contact SBG for instructions.

Net adjustment

Elastic adjustment did not work. Appeared in 2003.03.06.

Communication, Geodimeter

Transfer adjusted for Program 32.

Rounds of measurement

Better handling of stations without rounds.

AutoCAD Dwg

MTEXT-objects supported (text objects with multiple rows of text).

Volume Calculation

The calculation of top soil reported the complete soil area instead. (Version 306-308).

Graphics

Possibility to create cloes polygones with the tool 'connect lines'.

Graphics

Lines that were connected to an entry in the code list, without the line type given, were invisible in the graphics.

2003.04.308

03-04-24

Volume Calculation

Volume calculation in combination with 'unit height'. Error in the calculation fixed (only applies for version 306-307).

Graphics

Input of coordinates for tools in profile views didn't work. Solved.

2003.04.307

03-04-22

Volume Calculation

General top soil in combination with rock cut above soil didn't work.

Levelling net adjustment

Problem with toggling on/off of observations solved.

Graphics

Quicker drawing of line types from the code list.

2003.03.306

03-04-10

Volume Calculation

A new function added, 'create report with orthogonal points'.

Volume Calculation

Improved handling of buildup layers. The layer widths are stored in a file parallel to the mbs-file.

Volume Calculation

Border polygon calculation added. Both .geo- and .pxy-format.

Volume Calculation

Top soil calculation, any number of border polygon can be used within a single cross section.

Volume Calculation

General top soil area is now better adjusted to the theoretic surface width.

Plane net adjustment

Better handling of large coordinates.

Rounds of measurement

Prism constant was lost. Solved.

Survey

New setting for generation of lines from point numbers when communicating, opening old inm-files and calculating.

Survey

Station data impossible to edit for some free stations. Solved.

Survey

Modify surveys not working with remark field. Solved.

2003.03.304

03-03-13

Projektioncorrection of measurements

Added support for Estonian projection.

Communication, Leica

Prismconstant for each measurement is written to the plm-file.

Graphics

Coordinate crosses were drawn with the same pen width as the last coordinate file in a drawing.

2003.03.303

03-03-03

Communication

Transfer of measure data from and coordinates to/from Trimble DC. More formats will be added later.

Transformation

New option to store parameter files in the project directory.

Surveying, coordinate calculation

It's now possible to deselect the report creation.

Communikation, Geodimeter

The use of a comma to separate points from lines didn't work. Solved.

Modify survey

Numerical operations didn't work. Solved.

Volume Calculation

It's possible to step through the calculation without having existing terrain models. The design values can be used instead.

Volume Calculation

New function, 'Insert standard section'.

Volume Calculation

The position of a side line is shown in the cross section graphis.

Volume Calculation

Improved edit-mode for theoretic/design standard section ('preview standard section'). The side offsets for side lines can be edited.

Volume Calculation

Copying standard section resulted in duplicate elements. Solved

Graphics

Printout and print preview now works for cross sections and profile/longitudinal sections as well.

2003.02.300

03-02-10

Tunnel

The new tunnel module is availbale.

Surveying

New measurement file format, plm.